How To Prevent Moisture And Maintenance Of Self-Wringing Double Sided Flat Mop At Home?

May. 17, 2019

The family is one of the main places in our daily life. The comfortable and clean home environment is very important. The mop can be described as a good helper, but the floor will be damp after the Self-Wringing Double Sided Flat Mop has been mopped, especially in the rainy weather. You can add a few spoonfuls of salt in warm water. After the salt is fully dissolved, soak the mop in the salt water and wring it out to start mopping the floor. The warm salt water evaporation rate will be faster than the cold water, and the floor will dry faster.

Because the magnesium chloride and calcium chloride in the salt can absorb moisture and prevent the water vapor from condensing on the ground, the mop will become small particles after being absorbed and dried, and the drying time will be prolonged. It needs to be understood clearly.

When repairing, you can use the common Phillips screwdriver to remove the pedal, then use the M4-M5 hexagonal buckle to remove the red gear; then remove the rack, remove the damaged spring, press the new spring On the bayonet of the rack; then attach the other end of the new spring to the other tab of the pedal with a needle-nose pliers or other tool; install the entire pedal after the large gear is installed.

In this way, the mop rod can be used better, and it is highly praised by consumers. For more application and maintenance information, please call us for telephone consultation and look forward to the visit of new and old customers from all walks of life.

Self-Wringing Double Sided Flat Mop

contact us

Tel.: +86 316 325 0883

Mob.: +86 159 3336 3373

E-mail: sales@linyumop.com

Add.: Bazhou Development Zone, Langfang City, Hebei Province, China

follow us

Copyright © Bazhou Linyu Household Products Co., Ltd. All Rights Reserved | Sitemap

Technical Support: